Removal and installation of an overlay of a lantern of illumination of license plate
Liftgate Models
♦ Remove the rear door trim panel by unscrewing the panel retaining clips with a 3mm hex wrench.
♦ On the inside, unscrew the screws (2, see Fig. 496).
Rice. 496 Screws of fastening of an overlay of lanterns of illumination of license plate
♦ Loosen the screws (3) and remove the trim (1).
Models with double doors
♦ Unscrew the three screws (2, see fig. 497) and remove the trim (1).
Rice. 497 ibid
Rice.
498 Rear double-leaf door device 1 - door leaf, 2 - insert, 3, 9, 18, 21, 23, 26 - screws, 4 - top lock with rotary latch, 5 - top lock rod, 6 - stop button, 7 - guide lock buttons, 8 - outer door handle, 10 - bolt with a washer, 11 - lock button rod, 12 - lock 13 - rod, 14 - lever mechanism, 15 - thrust pad, 16 - rivets, 17 - bottom lock with rotary latch, 19 - lower lock rod, 20 - wiper motor, 22 - washer, 24 - gasket, 25 - lower hinge, 27 - door opening limiter, 28 - upper hinge
Installation is carried out in the reverse order.