Removal and installation of the decorative panel of a door
Removal
♦ Lower the glass.
♦ Remove the screw (20, see Fig. 482) at the top left and right and remove the piston (12).
Rice.
482 Decorative elements of the front door 1 - door, 2, 5 - sockets, 3 - seal, 4 - noise insulation, 6 - decorative panel, 7 - door handle, 8 - screw, 9 - decorative trim, 10 - manual locking button, 11 - guide, 12 - piston, 13 - inner door release handle, 14 - door valve, 15 - trim, 16 - screw, 4 Nm, 17 - power window handle, 18 - lining, 19, 20 - screws, 21 - U- figurative overlay
♦ Slide the power window handle cover (15) towards the axle and remove it from the handle.
♦ Loosen the screw on the power window handle (16) and remove the handle (17) together with the pad (18).
♦ Remove the handle (7).
To do this, remove the decorative trim (9) and unscrew the screws (8) located under it. the Transporter T4 door guides in an upward motion .
Rice. 483 Removing the decorative door panel
Installation
♦ Before installing the panel, check and fit the U-grommets (3) into the door's grooves.
♦ Replace the panel in reverse order.