Cooling system pump diesel 2.4 l
Drain the coolant from the cooling system Transporter T4 .
Loosen the alternator and power steering pump and remove their drive belts. Remove the power steering pump and set it aside without disconnecting the hydraulic hoses. Remove the front timing belt covers. Remove the timing belt.
After removing the toothed belt, access to the coolant pump is free.
Now, having unscrewed the mounting bolts, you can remove it from the engine block. The pump is installed in the reverse order. First attach the pump without tightening the bolts, after adjusting the toothed belt tension, it will be possible to finally tighten the pump mounting bolts (torque 20 Nm). Put on the timing belt and adjust its tension. Before starting the engine, be sure to check whether the gas distribution system is correctly adjusted (by marks) and whether the crankshaft and camshaft have changed their position during these operations. Even their slight displacement is unacceptable. The cooling system pump is beyond repair. If damaged, it must be replaced as an assembly.
We study history - medals and orders of the Russian Empire - russianglory.ru . Specifications T4 .