SHRUS - disassembly

♦ Mark the position of the inner hub in relation to the cage and outer ring.
♦ Clamp the outer ring in a vise and rotate the hub with cage as shown in fig.
375. ♦ Take out the balls one by one. The balls of each joint belong to a certain selection group and they cannot be changed with the balls of another joint CV joint Volkswagen Transporter T4 .
♦ Tilt the separator as shown in fig. 373 and rotate so that the two rectangular windows fit on the edges of the outer ring. In this position, you can remove the separator together with the hub.


Rice. 373 Installing the separator in the position for removal


Rice. 374 Removing the hub from the separator



♦ Turn the hub in the separator so that one of its segments can enter the rectangular window and remove the hub from the separator (see Fig. 374).
The square window should be in the location indicated by the arrow.
♦ Insert the balls from opposite sides, making sure they are in their original position relative to the cage and outer ring.


Rice. 375 Dismantling the separator SHRUS T4

Half shaft Conveyor . Transmission VW T4 .

For any site suggestions: [email protected]