Wheel Angle Adjustment
As mentioned earlier, the wheel angle is checked at the upper wishbone Transporter T4 .
♦ Loosen the adjusting eccentric blocking bolt (1, Fig. 398) and loosen the nut (2) from below the ball joint.
Rice.
398 Elements for adjusting the angle of the wheel A - eccentric washer, 1 - blocking bolt, 2 - ball stud nut
♦ Turn the eccentric washer indicated by the arrow (A) to obtain the required wheel inclination.
The correct inclination can only be obtained by a method: measuring, adjusting, measuring, etc. until you get the desired result. ♦ Tighten the bolt (1) to 55 Nm and the nut to 110 Nm.
The difference in the inclination of the wheels on both sides cannot be more than 30º.