Fog lights
Front
♦ On the back of the fog lamp (under the bumper), disconnect the wiring connector from the cover.
♦ Remove the cover (1, see Fig. 523) from the headlight housing by turning to the left.
Rice. 523 front fog lamp connector
♦ Disconnect the ground wire (2) in the lantern and the connector (3) in the cover body.
♦ Unhook the spring wire stopper (4) of the holder and remove the burnt out lamp.
♦ Insert the new lamp in such a way that the notch on the socket matches the guide bar (5) of the housing.
♦ Secure the lamp with the wire stopper.
♦ Connect electrical connectors.
♦ Replace the rear cover.
♦ Check the adjustment of the T4 fog lamps.
Rear
♦ Use a screwdriver to press the retaining lug of the rear fog light (see arrow fig. 524) and pry off the lens.
♦ Remove the lamp housing.
Rice. 524 Rear fog lamp T4
♦ Turn to the left and remove the burned-out lamp socket.
♦ Replace the lamp.
♦ First insert the diffuser from the left side and then press firmly until it locks into place with the tab.