License plate lights
♦ The two license plate lights are each secured with two Phillips screws (Philips type).
♦ Remove the lantern completely.
♦ Remove the cartridge from the flashlight.
♦ Replace the defective lamp.
♦ Insert the lamp body into place and secure.
Removal and installation of the headlight / turn signal light
♦ The turn signal light can be removed separately from the headlight as already described above. The headlight is not disassembled, therefore, if the reflector or lens is damaged, it must be completely replaced.
Rice.
525 Adjustment screws - pre-1996 models A - height adjustment, B - horizontal adjustment
Removal
♦ Remove the shield located under the headlight.
♦ Loosen the fixing screws (see arrow fig. 526 or 527) and pull forward the headlight together with the direction indicator lamp.
Rice. 526 Headlight mounting screws - pre-1996 models
Figure 527 Headlight mounting screws - models from 1996
♦ Disconnect the headlight and turn signal connectors.
♦ If necessary, after depressing the bar, pull the direction indicator forward and separate it from the headlight.
♦ Installation is carried out in the reverse order, if necessary, have the headlights adjusted by a specialist workshop.